I emailed Jesse late last night and asked him to get some heatshrink tubing and wire wraps.  So he brought those over tonight and we put heatshrink over the terminals on the key switch.  Figured it would help protect those from shorting out.  He grabbed the twist style of wire wrap and I think that the split tube wrap would be better, so we’ll see about getting some of that tomorrow.  We were able to heatshrink the terminals, I bought some paint, so we started painting parts.  So far the console cover and a side shield.  We took the emblems off the hood and we will try to paint that tomorrow night.

We removed the starter, looked things over, turned the flywheel all the way around to see about missing teeth, and we could not figure out why the starter was not hitting every time we turned the key.  We cleaned up the area where the starter mounts and re-installed it.  Well, it must have just been a little off on placement before, because now it hits every time we turn the key.  Weird.

We started to wire in the lights.  We are out of yellow wire, but have a lot of orange left, so we are substituting that for the light wires.  We realized that the fender lights just aren’t going to be sufficient with the loader on the tractor, so we are trying to figure out another location for another set of lights on the loader.  We looked over where to run the wires for the lights.  When my fenders got rebuilt, I lost my wire run tubes.  I’ve seen wire clamps before, I wonder where I can find some.  We ran out of terminal connectors, so we called it a night.